Download Well Optimization Manager User Manual

Well Optimization Manager Program User Manual (FB107+ROC800)
Chapter 4 – Setting up a Well Optimization Function
This chapter describes how to set up the well core parameters and the
main functions of the Well Optimization Manager; the Intermitter, the Gas
Lift, and the Plunger Lift. This section functions as a quick start guide to
show the basic fields that you must for typical program operation. Each
section includes additional steps to show how to manually simulate the
functionality in a non-production scenario.
4.1 Setting up the Well Core Parameters
Regardless of the optimization technique you employ, the Well
Optimization Manager shares some basic, common features. These
parameters include configuration of the the casing pressure input, the
tubing pressure input, and the sales meter. This section walks through the
basic starting point requirement for all the wells.
4.1.1 Well Core Configuration
You configure the well core parameters using the PMWO Config screen.
See Section 3.2 PMWO Config Screen for instructions on how to access
the PMWO Config screen.
1
5
2
3
4
6
Figure 39. Well Core Configuration
Follow the following steps.
Issued May 15
137