Download User`s Manual

specified cyclic transmission, this value must be needed.
z
Return:
_NO_ERR: OK
_CYCLIC_CONFIG_ERR: The cyclic transmission messages are over 5
messages or the time period is less than
0.5ms.
5.1.54 DeleteCyclicTxMsg
z
Description:
Remove a cyclic transmission message which is added by the
function AddCyclicTxMsg before.
z
Syntax:
int DeleteCyclicTxMsg(unsigned char Handle)
z
Parameter:
Handle: [input] The handle of the cyclic transmission message which is
obtained by the function AddCyclicTxMsg.
z
Return:
_NO_ERR: OK
_CYCLIC_HANDLE_ERR: The handle value can’t be found in the cyclic
transmission engine.
I-8120W User’s Manual
(Version: 1.02 June 9, 2009)
143