Download MAN - QTP 12/R84 - UK - 5.00

grifo®
ITALIAN TECHNOLOGY
COMMANDS FOR GRAPHICS
QTP 12/R84-GF2, featuring a 140 x 16 pixels graphic display, allows the possibility to show graphic
images, histograms, characters with different font and size, diagrams, etc., through a short group of
simple graphic commands.
All graphic commands are based on the smallest visible entity of display, that are points or pixels that
are orgranized in the coordinates system described in the following figure:
0,0
139 , 15
FIGURE 58: COORDINATES OF GRAPHIC DISPLAY PIXELS
NOTE:
Please remind that following graphic commands can be used only on model
QTP 12/R84-GF2 while the remaining models do not recognize them as commands so
they show the character of the command sequence on display.
In addition, QTP 12/R84-GF2 recognizes both graphic and alphanumeric commands
already described in previous paragraphs.
ALPHANUMERIC MODE SETTING
Code:
27 208
Hex code:
1B D0
Mnemonic:
ESC ASCII(208)
This command sets alphanumeric representation mode, which allows to use all alphanumeric
commands. When command is executed, the cursor (if enabled) is shown in the last position decided
by previous commands.
After power on or initalization it is immediately selected alphanumeric mode to make all functionalities
available.
Page 86
QTP 12/R84
Rel. 5.00