Download Installation Manual
Transcript
MobilePro-Anschalte-Installations-Handbuch_4_2_13_EN 10/19/09 16:23:19 These settings are relevant on the NT side only if a "mixed" (incoming/outgoing) B-channel assignment is active. The B-channels are numbered from 1 - 31. With the fields "BchanInMin" and "BchanInMax" B-channels for incoming calls are used. With the fields "BchanOutMin" and "BchanOutMax" B-channels for outgoing calls are used. With the fields "BchanBiMin" and "BchanBiMax" B-channels for both directions are used. For the assignment, the B-channels for the respective direction are used first. If no more B-channels are available in this pool, the Bi-channels (bidirectional) are used. If none of those are available either, no connection is possible. Scheduling Modes (BchanInSched BchanOutSched) Up_Count B-channels are assigned in an order from Min to Max. Down_Count B-channels are assigned in an order from Max to Min. Up_Round B-channels are used in upward sequence. The start is not always with Min. Down_Round B-channels are used in downward sequence. The start is not always with Max. 44/63