Download Explorer 349 - Spectra
Transcript
Explorer OEM Diode-Pumped, Q-Switched Ultraviolet Laser System Table B-6: User Parameters The parameters in this table comprise a user parameter set. Two different sets can be defined and stored as “User Set #1” and “User Set #2.” Parameter Description Command to Modify Parameter Pulse repetition frequency QSW:PRF <n> Diode current DIOD1:CURR <f> or PCUR <f> Operation modes Auto-on feature Computer/Analog mode Sync mode after Q-switch Random Pulsing Mode CONT:AUTOON <n> MODE:RMT <n> CONFIG:APORT:SYNC <n> MODE:RANDOM <n> Polarity of analog port signals CONFIG:APORT:POLAR <n> Pulses per burst* BURST:CNTS <n> Sync pulse spanned over burst* BURST:SYNC <n> Delay time for first pulse suppression* FPS:DELAY <n> Delay time between trigger signal and optical pulse* QSW:TIMG:DELAY <n> SHG temperature CONT:SHG:TEMP <n> THG temperature CONT:THG:TEMP <n> Diode temperature CONT:DIOD1:TEMP <f> Alert time for software watchdog WDOG <n> * extended models only B-34