Download Explorer 349 - Spectra

Transcript
Explorer OEM Diode-Pumped, Q-Switched Ultraviolet Laser System
Table B-6:
User Parameters
The parameters in this table comprise a user parameter set. Two different sets can be defined and stored as
“User Set #1” and “User Set #2.”
Parameter Description
Command to Modify Parameter
Pulse repetition frequency
QSW:PRF <n>
Diode current
DIOD1:CURR <f>
or
PCUR <f>
Operation modes
Auto-on feature
Computer/Analog mode
Sync mode after Q-switch
Random Pulsing Mode
CONT:AUTOON <n>
MODE:RMT <n>
CONFIG:APORT:SYNC <n>
MODE:RANDOM <n>
Polarity of analog port signals
CONFIG:APORT:POLAR <n>
Pulses per burst*
BURST:CNTS <n>
Sync pulse spanned over burst*
BURST:SYNC <n>
Delay time for first pulse suppression*
FPS:DELAY <n>
Delay time between trigger signal and optical pulse*
QSW:TIMG:DELAY <n>
SHG temperature
CONT:SHG:TEMP <n>
THG temperature
CONT:THG:TEMP <n>
Diode temperature
CONT:DIOD1:TEMP <f>
Alert time for software watchdog
WDOG <n>
* extended models only
B-34