1
Download Section 15 - Melt-Disk System - Mold
Transcript
® Specialty Systems - Melt-Disk Manifold Cavity Preparation 1. Calculate the following dimensions at ambient (room) temperature: a. M easure the depth of the nozzle bore “a” from the top of the Manifold Plate to the Nozzle Support Base. a Figure 5-13 Calculating Nozzle Bore Depth "a" b. Measure the top section of the nozzle flange “b”. b Figure 5-14 Calculating Nozzle Flange Height "b" c. Measure the Manifold thickness “c”. c Figure 5-15 Calculating Manifold Thickness "c" Hot Runner User Manual Revision 12 Not under documentation control if printed. May be revised without notice Electronic version is available at www.moldmasters.com ©05-2010 15-8
