Download pdf manual

1.4 Important directions for use
CAUTION!
FiberScanONE™ reads the water grammage, not the total mass. Its advanced
technologies make it virtually insensible to both the forming fabric mass as
components present in the paper stock.
To calculate the final mass numbers, please read paragraph 2.2 carefully.
CAUTION!
Ceramic is sensitive to thermal shock! Temperature alerts are implemented. Please
let the FiberScanONE™ heat up slowly if it was stored in a cool environment;
preventing to do so might cause permanent and dangerous damages to the ceramic
sensor head.
CAUTION!
The ceramic plate needs a little break-in time to reach optimal smoothness. This is
achieved after only a few hours of usage.
CAUTION!
Prior to upgrading the instrument firmware, always consult Direct Service at +31 313
652 215. Wrong procedures might damage the control unit ROM.
Updated versions of the “FiberScan Host” software and the FiberScan™ on-board firmware are
available for free and can be requested per email at [email protected]
9