Download CANmunicator User Manual
Transcript
Q-Proto System www.qprotos.com --------------------------------------------------------------------------------------------------------------------------------- Byte 0 @ Byte 1 E Byte 2 Error code Byte 3 Checksum Error code: 1 2 3 MCP2515 Error Invalid command Invalid Checksum 9.7. Command T: Description: Set RTS command Format: Byte 0 @ Byte 1 T Byte 2 Command byte Byte 3 Checksum Command byte (refer to MCP2515 datasheet): y y y y y y y y 0: 1: 2: 3: 4: 5: 6: 7: None. TX0 TX1 TX0 & TX1 TX2 TX2 & TX0 TX2 & TX1 TX2, TX1, TX0 Response: Byte 0 @ Byte 1 T Byte 2 Checksum Error response: Byte 0 @ Byte 1 E Byte 2 Error code Error code: 1 2 3 4 MCP2515 Error Invalid QuickCAN command Invalid Checksum Invalid MCP2515 byte (byte 2) 9.8. Command M: Description: Send BIT modify command Format: - 16 - Byte 3 Checksum