Download UG60917-IDP-030A_IDP..
Transcript
Doc No: UG60917-IDP-030 Rev A Date: 08 February 2012 Contract No. NNG10XA03C Page 16 The GCOM SMD processes must always have extended headers disabled as KSAT does not provide them. For additional details on this Configuration Guide item see the ING Configuration Guide User Manual. 3.3.3 MSD 3.3.3.1 Persistent Mode The persistent mode for MSD is the standard mode of operation. It runs the ING process as a daemon process. A process started in this way should keep processing for the duration of an IDPS instance’s lifetime. This mode is used to process any dynamic MSD, both ancillary and auxiliary. 3.3.3.2 Transient Mode The transient mode of operation for MSD is used during the software update process. Its goal is to process files that are only periodically brought into the DPE. It examines the landing zones listed in section 5.2.2 one at a time, processing any MSD present. Once that is done, the process terminates. 3.4 S ECURITY There are no security considerations for ING processes. ING processes are only started using the IDP Operator display which provides the needed security protocols. HARDCOPY UNCONTROLLED JPSS CGS Form J-075A 04/20/2011