Download UG60917-IDP-030A_IDP..

Transcript
Doc No: UG60917-IDP-030
Rev A
Date: 08 February 2012
Contract No. NNG10XA03C
Page 16
The GCOM SMD processes must always have extended headers disabled as KSAT does not
provide them.
For additional details on this Configuration Guide item see the ING Configuration Guide User
Manual.
3.3.3 MSD
3.3.3.1 Persistent Mode
The persistent mode for MSD is the standard mode of operation. It runs the ING process as a
daemon process. A process started in this way should keep processing for the duration of an
IDPS instance’s lifetime. This mode is used to process any dynamic MSD, both ancillary and
auxiliary.
3.3.3.2 Transient Mode
The transient mode of operation for MSD is used during the software update process. Its goal
is to process files that are only periodically brought into the DPE. It examines the landing
zones listed in section 5.2.2 one at a time, processing any MSD present. Once that is done,
the process terminates.
3.4
S ECURITY
There are no security considerations for ING processes. ING processes are only started using
the IDP Operator display which provides the needed security protocols.
HARDCOPY UNCONTROLLED
JPSS CGS Form J-075A 04/20/2011