Download introduction - Custom Solutions, Inc.

Chapter 5
X-10
59
This command puts the selected X-10 device into the specified scene at the specified level. It only
works with X-10 brand devices that support the X-10 "extended codes". The scene number can be 1
to 4, and the level can range from 0 to 63. Refer to the "X-10 Lighting Scenes" section for a detailed
description.
Include In Scene # At Current Level
This command puts the selected X-10 device into the specified scene at whatever level the light is
currently at. It only works with Leviton brand devices that support the X-10 "extended codes". The
scene number can be 1 to 64. Refer to the "X-10 Lighting Scenes" section for a detailed description.
Execute X-10 Type Scene #
This command tells all X-10 devices in the specified house code to go to the specified scene. It only
works with X-10 brand devices that support the X-10 "extended codes". The scene number can be 1
to 4. Refer to the "X-10 Lighting Scenes" section for a detailed description.
Execute Leviton Type Scene #
This command tells all X-10 devices in the specified house code to go to the specified scene. It only
works with Leviton brand devices that support the X-10 "extended codes". The scene number can
be 1 to 64. Refer to the "X-10 Lighting Scenes" section for a detailed description.
X-10 Conditions
The following X-10 conditions can be checked by an If-Then or If-Then-Else statement.
If X-10 Module Is Off
This condition will be true if the specified module (house and unit code) is OFF. It will be false if the
module is ON or NEUTRAL.
If X-10 Module Is On
This condition will be true if the specified module (house and unit code) is ON. It will be false if the
module is OFF or NEUTRAL.
If X-10 Module Is Neutral
This condition will be true if the specified module (house and unit code) is NEUTRAL. It will be false
if the module is ON or OFF.
If X-10 Module Is Not Off
This condition will be true if the specified module (house and unit code) is either ON or NEUTRAL. It
will be false if the module is OFF.
If X-10 Module Is Not On
This condition will be true if the specified module (house and unit code) is either OFF or NEUTRAL.
It will be false if the module is ON.