Download Installation Manual - Bosch Security Systems

Transcript
DCN Next Generation Open Interface Release 4.4
•
en | 253
Changed in DcnNg 4.0:
o
Definition of OIP_DCN_MSGTYPE
o
SI_C_GET_OPERATION_MODE:
o

Value set of byStartupMode

Translation of Startup Mode and Slave-Id to multi mode (standalone, multi
master, multi slave and single Ccu)
SI_C_SET_OPERATION_MODE:

Value set of byStartupMode

Translation of Startup Mode and Slave-Id to multi mode (standalone, multi
master, multi slave and single Ccu)
E.3. Changes with respect to DcnNg 2.68
•
•
Added in DcnNg 4.0:
o
Support for DCN-CCU2 and DCN-CCUB2
o
SC_C_LOW_BATTERY_REQ
o
SC_C_LOW_BATTERY
o
IN_C_ASSIGN_UNIT
o
IN_C_UNASSIGN_UNIT
Removed in DcnNg 4.0:
o
•
Support for DCN-CCU, DCN-CCUB, DCN-WCCU and DCN-NCO.
Changed in DcnNg 4.0:
o
Definition of OIP_DCN_MSGTYPE
o
SI_C_GET_OPERATION_MODE, value set of byStartupMode
o
SI_C_GET_SYSTEM_MODE renamed to SI_C_GET_NETWORK_MODE
o
SI_C_SET_SYSTEM_MODE renamed to SI_C_SET_NETWORK_MODE
o
SI_C_GET_OPERATION_MODE:
o
o

Value set of byStartupMode

Translation of Startup Mode and Slave-Id to multi mode (standalone, multi
master, multi slave and single Ccu)
SI_C_SET_OPERATION_MODE:

Value set of byStartupMode

Translation of Startup Mode and Slave-Id to multi mode (standalone, multi
master, multi slave and single Ccu)
SI_C_GET_WAP_SETTING:

o
SI_C_SET_WAP_SETTING:

o
Value set of byOptions
Value set of byOptions
SI_C_WAP_SETTING:

Bosch Security Systems | 2014 July
Value set of byOptions