Download Chapter 1 EasyBuilder Pro Installation and Setup Guide
Transcript
Object HMI will not regularly read the data from [Action mode] (address + 2) to [End time] (address + 10). Please turn [Control] ON when the settings are changed. b. Status (Time setting address + 1) When the read operation above completes bit0 of this register truns ON. If time data read is out of range or incorrect in any way bit1 turns ON.. 15 02 01 00 Bit 0 Reserved (0 fixed) 0 Bit 00: Status bit: Read operation completed. (0: reading or reading not started. 1: reading completed.) Bit 01: Error bit: Start or end time format incorrect. (0: corrected 1: error) After the scheduler reads the data and the status is turned ON (The value in [Address + 1] = 01), the control bit must be turned OFF (address = 0). The status bit and error bit will be turned OFF (10) at the same time. 302
Related documents
EB8000 Serial User Guide
Chapter 1 EasyBuilder Pro Installation and Startup Guide
EB8000 Serial User Guide
EasyPrinter S3 Users Manual - ANA-U
Dosificación automática de tabletas Automatic chemical feeders
Chlorinateur-brominateur
HMI Setting
User Manual
GraviBlend -3P Portable Gravitometer User Manual
Spray
The IceCoffee Language Specification Tel Aviv University
POS Vario POS ColorTouch 64 Bit POS Mini 64 Bit