Download RobovieMaker2 User Guide

Transcript
・ Display pose slider name – To display pose slider name on top of the slider,
check this box.
“Inverse display” and “Reverse sign” are not only for changing display type but also
for changing direction when you manipulate pose slider with the mouse wheel. See
“3-5.Advanced useful functions to create motions” to get more information.
3-7.Reference poses preferences
The reference pose is automatically configured when you create a new robot project
based on a selected robot type. Additionally, this software can change the reference pose
and register multiple reference poses to switch them.
Switching reference poses is useful when you create new motions depending on its
category, such as “battle mode” and “soccer mode”. The motion creation and the
adjustment of servomotor become easier.
To register a new reference pose, or change the current reference pose, at first,
create new reference pose using pose sliders. Adjust pose sliders to reverse signed value
or same value as much as possible.
After creating the new reference pose, click “Pose”—“Register reference pose” from
menus. The following dialog will be open.
The list of registered
poses.
Registering the current pose in
the pose area as a reference pose.
Apply the preferences
of the dialog box.
To register the new reference pose, enter the reference pose in “Pose name”, and click
“Register” button. After clicking, the reference pose is added to the list located on the
right of the dialog.
To replace the registered reference pose to current pose in the pose area, select the
reference pose registered in the list located on the left of the dialog, and click “Replace
56