Download "user manual"

Transcript
S8
Comma pause time
This register sets the time, in seconds, that the modem must
pause when it encounters a comma (,) in the dial command
string. In some countries, S8 will set both wait before dialling
and comma pause time.
Range:
0-65
Default: 4
Units:
seconds
S10
Automatic disconnect delay
This register sets the length of time, in tenths of a second, that
the modem waits before hanging up after a loss of carrier. This
allows for temporary carrier loss without causing the local
modem to disconnect.
The actual interval the modem waits before disconnection is the
value in register S10.
Range:
1-254
Default: 20
Units:
.1 seconds
S11
DTMF dialling speed
This register determines the dialling speed which is prefixed for
each country.
Range:
50-150
Default: 85 or 150
Units:
.001 seconds
S12
Escape guard time
This register sets the value (in 20 ms increments) for the
required pause after the escape sequence (default 1 s).
Range:
0-255
Default: 50
Units:
.02 seconds
S-registers 4-4
User's Manual
Tecra 8000 Modem – International Modem.doc – ENGLISH – Printed on 09/05/00 as IM_T80UK