Download "user manual"
Transcript
S8 Comma pause time This register sets the time, in seconds, that the modem must pause when it encounters a comma (,) in the dial command string. In some countries, S8 will set both wait before dialling and comma pause time. Range: 0-65 Default: 4 Units: seconds S10 Automatic disconnect delay This register sets the length of time, in tenths of a second, that the modem waits before hanging up after a loss of carrier. This allows for temporary carrier loss without causing the local modem to disconnect. The actual interval the modem waits before disconnection is the value in register S10. Range: 1-254 Default: 20 Units: .1 seconds S11 DTMF dialling speed This register determines the dialling speed which is prefixed for each country. Range: 50-150 Default: 85 or 150 Units: .001 seconds S12 Escape guard time This register sets the value (in 20 ms increments) for the required pause after the escape sequence (default 1 s). Range: 0-255 Default: 50 Units: .02 seconds S-registers 4-4 User's Manual Tecra 8000 Modem – International Modem.doc – ENGLISH – Printed on 09/05/00 as IM_T80UK