Download XGV Users Manual

SafeStop
PAUSE WATCHDOG<0x0D><0x0A>
PAUSE TIMEOUT
WATCHDOG<0x0D><0x0A>
PAUSE WIRELESS
WATCHDOG<0x0D><0x0A>
TM
User Manual, Version 1.3
The external watchdog has expired
There is no link between the receiver and any
transmitter, and the external watchdog has expired
The receiver has received a transmitter pause
command and the external watchdog has expired
The Run/Pause toggle switch on the transmitter has
been placed in the Run position
PAUSE NONE<0x0D><0x0A>
LINK – returns the status of the wireless link between the SafeStop™ receiver and transmitter
Usage: LINK<0x0D><0x0A>
Command: LINK<0x0D><0x0A>
Possible Response
Meaning
Receiver has been placed into bypass
LINK BYPASS<0x0D><0x0A>
LINK 0%<0x0D><0x0A>
No wireless link detected
LINK XX%<0x0D><0x0A>
Wireless link active, signal strength at XX%
TXSTATUS – returns the status of all transmitters currently in control of the receiver
Usage: TXSTATUS<0x0D><0x0A>
Command: TXSTATUS<0x0D><0x0A>
Possible Response
Meaning
No active transmitter links
TXID NONE<0x0D><0x0A>
TXID VVVV: Status=0xWW Link=XX%
Batt=YY% FW=ZZ
Transmitter ID “VVVV” stats displayed, repeated for
each transmitter with an active link, “WW” indicates
transmitter status code, “XX” indicates transmitter
signal strength, “YY” indicates transmitter battery
level, and ZZ indicates transmitter firmware revision
WATCHDOG – returns the status of the external watchdog
Usage: WATCHDOG<0x0D><0x0A>
Command: WATCHDOG<0x0D><0x0A>
Possible Response
Meaning
24