Download Hardware User Manual

Transcript
Figure 6-2: Mechanical outline and bottom connectors (top view)
The mechanical outline represents a TOP VIEW of the connectors placed at the bottom of the core board.
6.3
Side View
31.0
36.0
2.0
1.1
2.45
24.5
5.7
5.7
Figure 6-3: Side View with connector mounted, 0.5mm tolerances
6.4
Footprint
The footprint of the baseboard may look as shown in Figure 6-4. Table 6-2 shows the usable connector types.
CM-BF527_HUM_V2.2.docx
23