Download English
Transcript
3. Connection Setup For Mac users: Mac OS does not support some applications. Refer to System Requirements for Applications (13¿UVWEHIRUHVHWWLQJXSWKHFRQQHFWLRQ 3.1 Connection via Wired LAN The connection via wired LAN is available. Set wired LAN for the projector by following the instructions of your network administrator when connecting to the existing network. hub 3.2 Connection setup of Wired LAN 1) Connect the projector to the computer via a hub with a LAN cable (CAT-5e or higher). 2) Press the MENU button on the remote control or the control panel of the projector. The MENU you last used will appear. Use the cursor button to select the following. EASY MENU > ADVANCED MENU > NETWORK > WIRED SETUP 3) Set the following items in WIRED SETUP. 䞉 㻌DHCP 䞉 IP ADDRESS 䞉 SUBNET MASK 䞉 DEFAULT GATEWAY 䞉 DNS SERVER As for setting an IP address, refer to “About IP address”. (8) 6HOHFW$33/<WKHQSUHVVWKH(17(5EXWWRQWRUHÀHFWWKHVHWWLQJV 7