Download MPS 100 communication setup

Product description
The Micro Power Server MPS 100 is an Ethernet-based device (10 Megabits / s)
providing a transparent interface between Ethernet-based networks and Modbus
slave devices. The Modbus slave devices may include Micrologic control units on
Masterpact or Compact NS circuit breakers, PM500 Power Meters or any other
devices that communicate using the Modbus protocol (RTU).
The MPS 100 uses the Modbus TCP/IP protocol to access information across
either a Local Area Network connection(Ethernet port) either a Dial-Up Network
connection (RS232C modem port).
The MPS 100 has a master Modbus connector and I/O ports (six inputs / two
outputs) for external events / local actuators connections.
E91534
The MPS 100 provides :
-TCP/IP-Modbus Gateway through LAN or via modem
- Automatic notification and Data logging via push-mail
- WEB server with embedded html pages. These pages are used either for MPS
100 configuration, either for remote monitoring of Micrologic trip unit and PM500
Power Meters.
Functionnal diagram
Note.
The Ethernet and RS232C modem ports share internal services (gateway and web server)
simultaneously, however it is impossible to communicate from the LAN to the modem and/or
from the modem to the LAN.
MPS100 User Manual - Rev 1.08ab.doc
Schneider Electric
-2-