Download User Manual
Transcript
USER MANUAL HDMI MATRIX ROUTER - OHM88 (OHM66) 3.2.2 Preview: Shows all Input-Output configurations Command line format: Start (*) + Router ID (3 byte) + Command (1) + Data Length (000) + End (!) Byte Start ASCII * 2 5 5 1 0 0 0 ! Hex 2Ah 32h 35h 35h 31h 30h 30h 30h 21h 3.2.3 Router ID Command Data Length End Cancel: Cancels configuration of outputs for each Input. Command line format: Start (*) + Router ID (3 byte) + Command (2) + Data Length (variable) + Input Channel (2 byte) + End (!) Example: Disconnect Input Channel 1 Start ASCII * 2 5 5 2 0 0 2 Hex 2Ah 32h 35h 35h 32h 30h 30h 32h 3.2.4 Upload Data Request: Uploads connection data to the controller. Router ID Command Input Channel 0 1 Byte Data Length 30h End ! 31h Command line format: Start (*) + Router ID (3 byte) + Command (3) + Data Length (000) + End (!) Byte Start ASCII * 2 5 5 3 0 0 0 ! Hex 2Ah 32h 35h 35h 33h 30h 30h 30h 21h 3.2.5 21h Router ID Command Data Length End Upload Data Request: Allows OHM88 to respond with ACK signal to controller in the following format: 0x06(06h) + Connection DATA + 0x07(07h) The Connection Data represents the connection information of router 1) Connection Data for OHM88: 1-1, 2-2, 3-3, 4-4, 5-5, 6-6, 7-7, 8-8 Byte Start Router ID ASCII * 2 5 5 3 0 3 2 Hex 2Ah 32h 35h 35h 33h 30h 33h 32h OHM88/66 Manual - Edition 6a Command Data Length Output Channel 0 1 30h 31h Input Channel 0 1 30h 31h Page 25