Download Loader scales L2180 - loadritensw.com.au

LOADRITE L2180 User manual
6)
Complete the following:
If …
Then …
you would like to edit another
data value

Press

Go back to step 4.

Press
.

press
until the required data field is displayed, then press

Go back to step 5.
you would like to select a different
data field
you have finished editing data
values
5.1.4.
Press
until the required data value is displayed, then press
.
.
twice to return to the Setup Menu.
Docket numbers
If a Data field has been set as an AutoInc (auto-incremental) value during installation, it can be used as a docket number. The
docket number will increment by 1 and be automatically assigned every time a new load is started. Auto-incremented docket
numbers cannot be entered manually.

To edit the first number used for auto-incremented docket numbers, see "Editing a data field value" on page 5-23.
If a Data field has been set as a number, it can be used as a manually-entered docket number for each load. Complete the
following to manually enter a docket number:
1)
.
Press
The Data Menu will display.
2)
Select Docket, then press
.
The Docket screen will display.
3)
Press
4)
.
Use the keypad to enter a docket number, then press
The new docket number will be assigned to the next load.
5.1.5.
.
Data Suspend
The Data Suspend functionality is only available if selected at installation.
Data Suspend is a feature that allows you to temporarily suspend data values and set them to 0 (zero).
While data is suspended, the LOADRITE Weighing System will:

Exclude all suspended data fields in printing

Override all suspended data fields with 0 in data logging

Display the Data Suspend message instead of the data title on the Total screen.
Complete the following to suspend or resume data:
1)
.
Press
The Data Menu will display.
2)
Select Data Suspend, then press
The Docket screen will display.
3)
To suspend data, select On, then press
5-24
.
; To resume data, select Off, then press
.