Download Pro-Motion User`s Guide - Performance Motion Devices

Transcript
Control Window
4
The Motion tracking options define:
z
z
z
The maximum allowed magnitude of the position error for the tracking
mechanism and for the “at settle” mechanism.
The amount of time allowed for the axis to settle.
Whether or not the motion complete status bit will utilize the commanded position or the actual encoder position to determine if motion is
complete.
4.11.1 Using the Tracking Dialog Box
To set the Tracking options:
1
In the Action field, select the action the motor should take when the
position error limit is reached:
z
None
z
Abrupt stop
z
Smooth stop
z
Disable position loop
z
Disable current loop
z
Disable Motor Output
z
Abrupt stop with clear position error
NOTE: For descriptions of these options, refer to Section 4.5.3.
2 In the Position error limit field, set the value of the maximum position
error to be allowed by the motion processor.
3 Complete the Settle time, Settle window, Tracking window, and Motion
complete mode fields as described Section 4.11.2.
4 Click Apply to activate the settings without closing the dialog box or
click OK to activate the settings and close the dialog box. Click Cancel
to abort.
For more information, refer to Chapter 7 in the Magellan Motion Processor User’s
Guide and the related commands from the Magellan Motion Processor Programmer’s
Reference.
Pro-Motion User’s Guide
51