Download User Manual

Ni c o m p S o f t w a r e
SETUP
The Setup menu allows for communication to be established between the Nicomp and the
computer controller.
Select Serial Port
Four serial ports are provided for setting up communications between the Nicomp and the
computer.
Position the cursor over the desired selection and click on the corresponding circle. A black
circle will display next to the selection and the parameter will appear in the System Setup menu.
Multi-Angle Option
This parameter is used to establish the configuration for the detection of scattered light.
There are four possible configurations to choose from:
Fixed Angle 90 Deg.
Selected when using the basic Nicomp in which the scattering angle is set to 90
degrees.
Nicomp 380 Manual
PSS-380Nicomp-030806
06/06
Page 5 - 19