Download USER`S AND PROGRAMMING MANUAL

prw1101a0600p_05.doc ♦ 32 / 89
635
Deetect DEV
37
- - - - > SAVE < - - - 1: SPA-440 (01)
2: SEA-360 (07)
Scanning HART line
Device: N
"OK"
MultiCONT conf.
DEV detect
EXT detdct
"OK"
Main menu
605
Inputs
UIM-s
MultiCONT config
"OK"
No HART device
M
List of detected devices (Short TAG)
Short address in brackets
M
No device found
(device list
will remain empty,
see next page)
No HART device
Same address
MultiCONT found devices with the
same long address. This is an error state
and detection stops.
Return to MultiCONT config
by clicking OK
Message appears
(see next page)
and detection starts
"OK"
N=0...15
5.4.1. DEV detect:
Queries the transmitters via HART line from 0 to 15, and lists them with 1…9, A, B, C, D, E, F tag.