Download Fire Detection Control Panel BC216-1 - honeywell

FM-x: LIF64-1 ¹ ²
Modules SYS.SENSOR
element address: is recognized automatically
Address point type
is recognized automatically
Output type ²
actuation
Zone/element Nr. ²
Function module 1 (ST2): zone 9701/element = address of the module +
500
Function module 2 (ST3): zone 9702/element = address of the module +
500
Actuat./element Nr. ²
Function module 1 (ST2): actuation 9701/element = address of the module +
500
Function module 2 (ST3): actuation 9702/element = address of the module +
500
Loop position
the element address is displayed as preliminary loop position
Interdep. Group Nr. ²
0
FM-x: LIF64-1 ¹ ³
Zones
Zone type
manual call point zone
FWI1-2
FBCU country version
free settable
FWI relay outputs
Relay Nr. : 1
Primary transmitting device
Output type
transmitting device
Signal type
Continuous signal
FWZ-monitor current
Medium
Transm.dev.number
1
Relay Nr. : 2
Not defined
FBCU country version
free settable
FWI inputs
all inputs: Not defined
FWI oc-outputs
all outputs: Not defined
NTB outputs
Output 1….16
all outputs: Not defined
Siren output
Preliminary alarming device
Output type
Alarming device
Signal type
Continuous signal
Alarm. Device number
1
LAB48-1
all light-emitting diodes: Not defined
Zone settings
GIF8-1: No zones- and elementtexts
LIF64-1: No zones- and elementtexts
Actuation settings
LIF64-1 No zones- and elementtexts, no combinations
43