1
Download 4076 & 4079 User Manual
Transcript
:STAT:QUES:NTR This command is used to set and query the value of the negative transition filter. Arguments Type: Range: Command Type: Setting Syntax: Examples: Query Syntax: Response: NRf 0 to 131,072. Non integer arguments are rounded before execution Setting or Query :STAT:QUES:NTR<ws><NRf> :STAT:QUES:NTR 2048 :STAT:QUES:NTR? NR1 4.13.5.4.4 Event Register :STAT:QUES:EVENt? This query is used to read the event register. Reading the register clears it. Command Type: Query only Query Syntax: :STATus:QUES:EVEN? Response: NR1 4.13.5.4.5 Event Enable Register :STAT:QUES:ENABle This command is used to set and query the value of the enable register. Arguments Type: Range: Command Type: Setting Syntax: Examples: Query Syntax: Response: NRf 0 to 131,072. Non integer arguments are rounded before execution. Setting or Query :STAT:QUES:ENAB<ws><NRf> :STAT:QUES:ENAB 2048 :STAT:QUES:ENAB? NR1 4.13.6 System Subsystem The SYSTem subsystem collects the functions that are not related to instrument performance. The functions implemented in the AWG are security, GPIB address changing, error queue reading, SCPI version reading, and power-on buffer setting (not SCPI-defined). The command structure is as follows: :SYSTem :COMMunicate :GPIB :ADDRess <numeric value> 86
