Download LB Auomated Certification Software Manual

PowerSensor+ Field Certification Procedure
11/14/2012
This completes the certification process for the selected UUT.
If you have other UUT’s of the same RF connector type that are connected via
USB and have been warmed up, you can start the process again, this time
skipping the calibration process, or select “Exit” to return to the main screen.
Certification failures can be caused by:
1) a defective UUT;
2) a defective CAL_Sensor
3) a defective calibration measurement, usually caused by faulty RF
connections when connecting the Cal_Sensor or the UUT sensor.
23