Download AEI RAIL NETWORK BUILDER

Transcript
AEI Rail Network Builder
Track and switch symbols
align and will link with
each other
Track and switch symbols
do not align and will not
link with each other
Figure 5 - Linkages
3.4.1. Track, Switch, AEI Reader and Yard Numbering
Each time a new track, switch, AEI reader, or yard is added to the layout, the AEI Rail Network
Builder program automatically assigns a number to it. The numbering starts with 0, and no two
tracks, for example, can have the same number. Numbers are only unique for each device type;
therefore, there can be a Track 0, a Switch 0 and an AEI Reader 0.
Each switch and AEI reader symbol added to the layout will be assigned a number different from
other devices of its type. This is not true for track symbols that align with each other. Track
symbols that align with each other will usually be given the same track number to form a single
track segment.
Figure 6 shows several examples of numbering of track symbols. The track numbers appear next
to the symbol. Any time track symbols do not align with each other as seen with the right most
symbol for Track Segment 0 and left most for Track Segment 1, a new number is assigned. A new
track number is also assigned if an AEI reader or switch symbol is inserted between two or three
adjacent track symbols.
6
24 February, 2000