Download AC Servo System Quick Set_up Guide

MSHD Quick Set_up Guide
Important Notice
All rights reserved. No part of this work may be reproduced or transmitted in any form or by any
means without prior written permission of .
Disclaimer
The information in this manual was accurate and reliable at the time of its release. MOONS’. reserves the right to change the specifications of the product described in this manual without notice
at any time.
Trademarks
All marks in this manual are the property of their respective owners.
Customer Service
is committed to delivering quality customer service and support for all our products. Our goal is to
provide our customers with the information and resources so that they are available, without delay,
if and when they are needed.
In order to serve in the most effective way, we recommend that you contact your local sales representative for order status and delivery information, product information and literature, and application and field technical assistance. If you are unable to contact your local sales representative for
any reason, please use the most relevant of the contact details below:
For technical support, contact:
[email protected]
Part Number
For ordering the MSHD, refer to the following diagram:
MSHD - 006 - 2A
AF
1 - XX
Custom specifications
（If applicable）
Analog Input
1- One Analog input, 16bit
2- Two Analog, 14bit
Series
Rating
Cont/Peak(A)
1D5 1.5/4.5
003 3.0/9.0
4D5 4.5/18.0
006 6.0/18.0
008 8.0/28.0
010 10.0/28.0
013 13.0/28.0
Rev. 1.0
4/10/2012
Interface Options
AP- Analog/Pulse RS-232
AF- Analog/Pulse Rs-232/CANopen®/USB
EC- EtherCAT
AC Power 200V
Single Phase 115VAC(-15%～10%)50/60Hz
Single Phase 230VAC(-15%～10%)50/60Hz
Three Phase 120-240 L-L VAC +10% -15% 50/60 Hz
2