Download DVC6000f Digital Valve Controllers

DVC6000f Digital Valve Controllers
Table 4-13. Transducer Block Parameter Definitions (Continued)
Label
PARAMETER_NAME
4
Index
Number
RO /
RW
Mode
Protect
Category
0 to 100%
N/A
Data Type: Float
Absolute value of
(TRAVEL_TARGET [49] − TRAVEL
[34]), Controls AI channel 10
N/A
0 to 100%
N/A
Data Type: Float
Controls AI channel 9
RO
N/A
0 to 100%
N/A
Data Type: Float
RO
N/A
−100% to 100%
N/A
Data Type: Float
RW
MAN
OOS
Travel Deviation
TRAVEL_DEVIATION
52
RO
N/A
Drive Signal
DRIVE_SIGNAL
53
RO
Drive Current
DRIVE_CURRENT
54
MLFB
MLFB
55
Failed Alarm
FAILED_ALM
56
Linear, Y=X
Data Type: DS-71
Used to report alerts to host
system.
RW
ALL
0=Undefined
1=Acknowledged
2=Unacknowledged
0=Undefined
NONE
0=Undefined
1=Clear−reported
2=Clear−not reported
3=Active−reported
4=Active−not reported
0=Undefined
N/A
ALARM_STATE
56.2
RO
N/A
TIME_STAMP
56.3
RO
N/A
0
N/A
SUBCODE
56.4
RO
N/A
0
N/A
VALUE
Maintenance Alarm
MAINT_ALM
UNACKNOWLEDGED
56.5
RO
N/A
0
N/A
Data Type: Float
Value of parameter at alarm time
for single alarm, 0 for multiple
alarms
Data Type: DS-71
Used to report alerts to host
system
57
57.1
Description
SETUP
51
56.1
Initial Value
Data Type: Unit16 Array[43]
Each item − 2500 to 12500
First integrator is number of valid
points. Followed by up to 21 X
values and then 21 Y values.
X values must be increasing.
Y values must be increasing or
same. A value of 2050 represent
20.50% Custom Points can be
written only if Input
Characterization (INPUT_CHAR
[50]) is not custom.
Custom Points
CUSTOM_POINTS
UNACKNOWLEDGED
Range
RW
N/A
0=Undefined
1=Acknowledged
2=Unacknowledged
0=Undefined
NONE
0=Undefined
1=Clear−reported
2=Clear−not reported
3=Active−reported
4=Active−not reported
0=Undefined
N/A
ALARM_STATE
57.2
RO
N/A
TIME_STAMP
57.3
RO
N/A
0
N/A
SUBCODE
57.4
RO
N/A
0
N/A
VALUE
57.5
RO
N/A
0
N/A
Data Type: Float
Value of parameter at alarm time
for single alarm, 0 for multiple
alarms
−Continued−
4-50
December 2009