Download user`s manual elevator controller cj1m processor 1

Transcript
 Choose "DM" for the type of register.
 Press "ENTER".
 Press the "LEFT/RIGHT" and "UP/DOWN" keys to enter 0360.
 Press "ENTER".
10 holes or pulses (difference between the deceleration point and the limit)(12 in=16 holes
(12/16=0,75))
10 holes or pulses *0.75=7.5 in
The normal slowdown limit LRB has to go up of 7 inches.
The number of holes difference should be between 1 and 3.
If the number of holes or pulses for the deceleration is changed (DM132 orDM133), the
normal slowdown limits will have to be moved
7-4