Download EnGenius L2 Switch CLI Manual
Transcript
IP IGMP Snooping Version Syntax ip igmp snooping version (2|3) Parameter (2|3) Ip igmp snooping running version 2 or 3 Default ip igmp snooping version 2 Mode Global Configuration Usage “ip igmp snooping version 3” will remove all ipv4 group entries when the forward method is src-dst-ip. When the forward method is mac, it will remove the dynamic group entry. The same is from v3 change to v2. For this, all querier versions will update to version 2. The configuration can use “show ip igmp snooping”. Example The following example specifies that set ip igmp snooping version 3 test. Switch(config)# ip igmp snooping version 3 Switch# show ip igmp snooping 261
Related documents
Command Line Interface User Guide
EnGenius EGS7228P network switch
Edge-Core ES3528M-SFP
GS1900 Series User's Guide - Server 2
EOS User Manual
XS3900-48F User's Guide
GS2200-24(P) User's Guide (January 2010) - Server 2
Stratix 8000 and Stratix 8300 Ethernet Managed Switches Release
TigerSwitch 10/100 Management Guide
Layer 2 Managed Stackable Switches
EOS System Message Guide
RMX-111 User Manual