Download EnGenius L2 Switch CLI Manual
Transcript
Queue ID 1 2 3 4 5 6 7 8 Queue Weight 1 2 3 4 5 9 13 15 Mode Global Configuration Usage The device support total 8 queues for QoS queueing. It is able to set the queue to be strict priority queue or weighted queue to prevent starvation. The queue with higher id value has higher priority. First, you need to decide how many strict priority queue you need. The strict priority queue will always occupy the higher priority queue. For example, if you specify the strict priority number to be 2, then the queue 7 and 8 will be the strict priority queues and the others are weighted queues. After you setup the number of strict priority queue, you need to setup the weight for the weighted queues by using “qos queue weight” command. And the bandwidth will shared by the weight you configured between these weighted queues. Example This example shows how to setup device with 3 strict priority queues and give other weighted queues with weight 5, 10, 15, 20, or 25. 546
Related documents
Command Line Interface User Guide
EnGenius EGS7228P network switch
Edge-Core ES3528M-SFP
GS1900 Series User's Guide - Server 2
EOS User Manual
XS3900-48F User's Guide
GS2200-24(P) User's Guide (January 2010) - Server 2
Stratix 8000 and Stratix 8300 Ethernet Managed Switches Release
TigerSwitch 10/100 Management Guide
Layer 2 Managed Stackable Switches
EOS System Message Guide
RMX-111 User Manual