Download EnGenius L2 Switch CLI Manual

Transcript
Queue ID
1
2
3
4
5
6
7
8
Queue Weight
1
2
3
4
5
9
13
15
Mode
Global Configuration
Usage
The device support total 8 queues for QoS queueing. It is able to set the queue to be strict priority queue or weighted
queue to prevent starvation. The queue with higher id value has higher priority. First, you need to decide how many
strict priority queue you need. The strict priority queue will always occupy the higher priority queue. For example, if you
specify the strict priority number to be 2, then the queue 7 and 8 will be the strict priority queues and the others are
weighted queues. After you setup the number of strict priority queue, you need to setup the weight for the weighted
queues by using “qos queue weight” command. And the bandwidth will shared by the weight you configured between
these weighted queues.
Example
This example shows how to setup device with 3 strict priority queues and give other weighted queues with weight 5,
10, 15, 20, or 25.
546