1
Download SUNSET E10_manual
Transcript
Bit # Assignment bit 2 ESCAPE 0 - C-Frame active 1 - C-Frame ignored bit 3 2Mb loops 0 - Subscriber 1 - Network bit 4 Loop 2 or Loop 3 0 - Subscriber 1 - Network bit 5 Loop 2 instruction 0 - Active 1 - Non-active bit 6 Loop 3 instruction 0 - Active 1 - Non-active bit 7 HDB3 command 0 - Active 1 - Non-active bit 8 Loop acknowledge 0 - Acknowledge 1 - No acknowledgment bit 9 Not defined... bit 10 Local Fault 0 - Active 1 - Non-active bit 11 Remote/ Line fault 0 - Active 1 - Non-active bit 12 C Frame loss 0 - Active 1 - Non-active bits 13-15 Spare 3) L1-Rx Options: 1-15, 17-31 Select the desired Line receive timeslot on which to receive Cbits. •Press NEXT (F1), or PREVIUS (F2) as needed. Because PCM-30, MFAS, framing is required, you may not select Ch.3 Menu Descriptions 3-59
