Download FBT-6

Operation
Manual Mode Functions
Manual Mode is entered when the Monitor detects the first out of
specification parameter or either button is pushed. The functions
available are described below in the order in which they appear.
1. Voltage
The DC voltage of the segment is displayed.
VOLTAGE
22.5V OK
If the DC voltage is less than the allowed limit (9V by
default), BAD is displayed instead of OK.
VOLTAGE
8.5V BAD
The DC voltage limit is configurable using the Set
OK/BAD Limits function in the FBT-6 Assistant software.
See Set OK/BAD Limits function on page 48 for
details.
501-338 FBT-6 User Manual Rev H
25