1
Download User Guide - Autodesk
Transcript
9 To match ALE or CTL event timecode/keycode to shot timecode/keycode in the Shot bin, do one of the following: ■ Click Match Media to match event timecode/keycode to available shot timecode/keycode in the Shot bin prior to assembling. ■ Enable Auto Match to automatically match event timecode/keycode to available shot timecode/keycode in the Shot bin during assembly. The match status is indicated in the Media column of the Assembly window. Successful matches are indicated by a Linked status, whereas unsuccessful matches generate a Need Match status. NOTE It is not necessary for all shots to be available prior to conforming. See Metadata Maintained for Missing Shots on page 205. 10 To manually match shots in the Shot bin to ALE or CTL events, use the Replace Shot tool to add the correct footage into the blank shots. See Replacing Shots on page 235. 11 Click Assemble to conform the ALE or CTL file and build the cut. Metadata Maintained for Missing Shots If certain shots in the EDL, ALE or Cutlist file are not yet available, or if you would like to update shots that are already linked to events with new shots, you can mark them for capture. Shots can be individually captured either before or after the initial conform. Metadata for missing shots will be maintained for inclusion at a later time, and black frames will be inserted in the timeline where the shot should be. In the meantime, work can begin on the available shots. To mark missing shots for capture: 1 In the Editing menu, click Assemble to display the Assemble menu. 2 In the Assembly window, Ctrl-click each event to be marked for capture. 3 Click Mark For Capture. Metadata Maintained for Missing Shots | 205
