1
Download User Guide - Autodesk
Transcript
3 Load the reference image to the frame buffer by doing one of the following: ■ Press K to load the current frame in the Storyboard to the frame buffer. ■ Right-click a Grade bin thumbnail. 4 Press L or click S to assign the reference image to Playhead B. The reference image appears in the Player. At any time, press L to toggle between the original shot (O button) assigned to Playhead B and the reference image (S button). TIP If you want to use a shot from the Storyboard for reference, you can use the shot assigned to Playhead B. In this case, you do not need to load a reference image to the frame buffer. 5 Press F5 to enable split view. 6 Press F4 to toggle horizontal and vertical split view. The images assigned to Playhead A and Playhead B are displayed. Playhead A is currently selected and displays the shot you are working on. Playhead B displays the reference image. TIP Press F3 to view your reference image (Playhead B) and the shot you are working on (Playhead A) in separate viewers. Viewing Reference Images | 363
