Download - Fujitsu manual server

Transcript
IPMI
Server menu
SEL Message Rev
Shows the version number of the IPMI specification in which the
current event is defined.
Sensor Type
Shows the sensor type that triggered the current event.
Sensor Number
Shows the sensor that triggered the current event.
SEL Event Type
Shows the current event type.
Event Description
Shows the current event in plain text. The data from SEL Event
Data is evaluated for this purpose.
SEL Event Data
Shows the data for the current event as a numeric code.
System Event Log (list mode)
Opens the System Event Log viewer in list mode. In this mode, the
entries are shown in abbreviated form. Therefore, up to 6 entries can be
viewed at once.
Use the [PageUp] key or the [PageDown] key to view the additional
entries.
Realtime Sensor Data
Calls a submenu in which a selection of system sensors is shown.
Use the [PageUp] key or the [PageDown] key to view the additional
entries.
LAN Settings
Calls a submenu, where you can make the following LAN settings for
iRMC.
Management LAN
Enables the LAN interface, which can be used by the iRMC.
Disabled
The iRMC LAN interface is disabled.
Enabled
The iRMC LAN interface is enabled.
Management LAN Speed
Specifies the speed for the management LAN port.
54
D2619-N - BIOS Setup Utility
RX300 S6 / TX300 S6