Download - Fujitsu manual server
Transcript
IPMI Server menu SEL Message Rev Shows the version number of the IPMI specification in which the current event is defined. Sensor Type Shows the sensor type that triggered the current event. Sensor Number Shows the sensor that triggered the current event. SEL Event Type Shows the current event type. Event Description Shows the current event in plain text. The data from SEL Event Data is evaluated for this purpose. SEL Event Data Shows the data for the current event as a numeric code. System Event Log (list mode) Opens the System Event Log viewer in list mode. In this mode, the entries are shown in abbreviated form. Therefore, up to 6 entries can be viewed at once. Use the [PageUp] key or the [PageDown] key to view the additional entries. Realtime Sensor Data Calls a submenu in which a selection of system sensors is shown. Use the [PageUp] key or the [PageDown] key to view the additional entries. LAN Settings Calls a submenu, where you can make the following LAN settings for iRMC. Management LAN Enables the LAN interface, which can be used by the iRMC. Disabled The iRMC LAN interface is disabled. Enabled The iRMC LAN interface is enabled. Management LAN Speed Specifies the speed for the management LAN port. 54 D2619-N - BIOS Setup Utility RX300 S6 / TX300 S6