Download warning - Amb-OS

Transcript
Refresh
After making changes to the timed transfers or to make sure you have the latest files from the receiver,
simply press the Refresh button. This only rereads the files on the AMR-100 and does not do a total refresh
which will re-transfer files.
Next Refresh
Newly arrived files update automatically and the system refreshes every 10 minutes. The next refresh time is
shown in under the next refresh message. Clicking the “Refresh” button will have the AMB-OS User
Interface reread the AMR-100 immediately and show any changes to the timed transfers.
Enable Miscellaneous Transfers
This option turns on and off the automatic transfer of programs that
do not have a timed transfer. Checking the “Enable misc transfers”
will cause the files to automatically transfer to your local directory. If
this box is not checked, then the files will not be transferred and will
remain on the receiver. All files listed in the Transfer Queue window,
do not have a timed transfer will be transferred automatically, if this
box is checked, after being received successfully.
Exit
Exit terminates the program. Because terminating the program will prevent any files
from transferring, you must confirm your desire to exit the program in the subsequent
dialog box.
Revision 19 – Amb-OS User Interface - 15y
54
© 2010