Download OfficeServ Call User Manual

Transcript
d. Refresh BLFs
If you want to refresh the status of a BLF, select the BLF, click right mouse button, and select
Refresh option. The selected BLF’s device status (station setup information and call state) is
refreshed.
If you select Refresh option without selecting any BLF, all the BLFs of current BLF group are
refreshed.
When you are trying to refresh the whole group, this warning message comes up.
It may take seconds per line to read station setup information, depending on performance
and load of your switch. Therefore, it may take quite long time to refresh all the devices of a
group.
If you only want to refresh call state, click No. Otherwise, click Yes.
e. Resize BLFs
You can resize BLFs if the display is in Card View. Move the mouse pointer to the bottom
right corner of the top left BLF; then the mouse pointer changes to a resize arrow.
Drag the resize arrow. The new size will also be applied to the other BLF groups.
f. Status Icons
BLF Type
IconG
Device
Device Status
Call StateG
Idle
Normal
G
Dialtone
G
Ringback
Ringing
Connected
69