Download OfficeServ Call User Manual
Transcript
d. Refresh BLFs If you want to refresh the status of a BLF, select the BLF, click right mouse button, and select Refresh option. The selected BLF’s device status (station setup information and call state) is refreshed. If you select Refresh option without selecting any BLF, all the BLFs of current BLF group are refreshed. When you are trying to refresh the whole group, this warning message comes up. It may take seconds per line to read station setup information, depending on performance and load of your switch. Therefore, it may take quite long time to refresh all the devices of a group. If you only want to refresh call state, click No. Otherwise, click Yes. e. Resize BLFs You can resize BLFs if the display is in Card View. Move the mouse pointer to the bottom right corner of the top left BLF; then the mouse pointer changes to a resize arrow. Drag the resize arrow. The new size will also be applied to the other BLF groups. f. Status Icons BLF Type IconG Device Device Status Call StateG Idle Normal G Dialtone G Ringback Ringing Connected 69