Download XorPlus CLI User Guide and Reference Manual

2 Operational Mode
2.1 Overview
The Default Mode provides basic show commands for viewing system information and simple network
commands (ping, traceroute,).
2.1.1 Access
This mode is accessed by logging on to the switch, or by using the exit command in Config Mode.
2.1.2 Exit
To exit from this mode, use the logout command to end the CLI session.
2.2 Commands
clear
Clear information in the system
cls
Clear the terminal screen
configure
Switch to configuration mode
exit
Exit this command session
file
Perform file operations
help
Provide help with commands
ping
Ping remote target
quit
Quit this command session
request
Make system-level requests
set
Set parameters of the system
show
Show system information
ssh
Start secure shell on another host
start
Start shell
syslog
System logging
telnet
Telnet to another host
traceroute
Trace route to remote host
2.2.1 clear command
arp
Clear address resolution information
ethernet-switching
Clear ethernet switching information
interface
Clear interface information
ipv6-neighbors
Clear neighbor information for IPv6
lacp
Clear lacp information
lldp
Clear lldp information
log
Clear contents of log file
ospf4
Clear ospf information