Download XorPlus CLI User Guide and Reference Manual

XorPlus# set interfaces gigabit-ethernet ge-1/1/1 disable true
[edit]
XorPlus# commit
Commit OK.
Save done.
[edit]
XorPlus# run show interfaces interface gigabit-ethernet ge-1/1/1 brief is
participatePhysical interface: ge-1/1/1, Disabled, Physical link is Down
Interface index: 1
Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Full
Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled
Interface flags: Hardware-Down SNMP-Traps Internal: 0x0
XorPlus#
3.4.5.2 ether-options
Syntax
set interfaces gigabit-ethernet <if-name> ether-options <{flow-control bool} | {802.3ad
lag-name} >
Hierarchy
Level
[config mode]
Release
Information
Description
Configure the ether options of the specified interface, including the flow-control and
802.3ad link aggregation.
Default
flow-control : true
Options
if-name - Configure the interface
lag-name - The specified aggregation interface whichh the interface will be added in.
Related
Topics
Example:
XorPlus# set interfaces gigabit-ethernet ge-1/1/1 ether-options flow-control true
[edit]
XorPlus# commit
Commit OK.
Save done.
[edit]
XorPlus# run show interfaces interface gigabit-ethernet ge-1/1/1 brief is
participatePhysical interface: ge-1/1/1, Disabled, Physical link is Down
Interface index: 1
Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Full
Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled
Interface flags: Hardware-Down SNMP-Traps Internal: 0x0
XorPlus#
3.4.5.3 mtu