1
Download Kaspro KA-Software Manual Rev_001
Transcript
Chapter 4 Windows 6. Save, compile and perform an online simulation of the project: LB0 is set to ON, and LW1 is set to 200. References for this example: Section 6.1, “Indicator Lamp”, Section 6.2, “Bit Setting Component”, Section 6.4, “Multi-State Setting” and Section 6.11, “Numeric Display” in Chapter 6. ◆Example 2: This is an example of pop-up keypad window for number entry. In many cases, we need to conduct write operations for registers. If the keypad is fixed on the current window, it will occupy too much screen area, greatly reducing the current window design space of the project. In this example, we use the direct pop-up window method to solve this problem. Assume that LW0 is the register needing an input operation. Note: The KA-SOFTWARE interface has a keypad in Window 3, which can be directly invoked, so you do not have to create a keypad by yourself each time. To create your own keypad, please refer to chapter 6. 91
