Download EPT VI - Drivven

Drivven, Inc.
EPT VI
angle_one_shot_reva.vi
This VI accepts the FuelSparkSupervisor from the EPT VI. When enabled, it generates a oneclock one-shot pulse at the Position specified in terms Crank Angle Ticks (CAT).
Connector Pane
Controls and Indicators
FuelSparkSupervisor This cluster input must be wired directly from the
FuelSparkSupervisor cluster output of a Drivven EPT VI. The FuelSparkSupervisor
cluster from a single EPT may be used to supervise any number of Drivven enginesynchronous output sub-VIs.
AOSControl Control cluster of parameters for configuring the angle-one-shot.
AOSEnable If AOSEnable is TRUE then AOS is enabled to operate according to
the specified Position. If AOSEnable is FALSE then AOS is forced low at all
times.
Position Angle-one-shots are generated with a leading edge coinciding with
Position and having a duration of one clock tick. The units of Position are CAT.
Drivven provides Offset2CAT.vi in the General RT VIs in the RT function palette.
This VI can be implemented at the LabVIEW RT level for converting an angle in
CAD, with respect to a cylinder TDC, to CAT.
AOS AOS output is generated with a leading edge coinciding with Position and a duration
of one clock tick. AOS defaults to FALSE when the function is disabled or when the EPT
SyncStopped Boolean is TRUE.
© Drivven, Inc. 2009 • EPT VI User’s Manual • Rev B
29