Download XL Remote Commands

Transcript
Response:
None.
Example:
-> GOESRRCHANNEL=1115
rs
Command:
GOESRRRATE?
Description:
Read the random transmission rate. This determines the window during which
the GOES radio will transmit after detecting a random trigger.
Parameters:
None.
Response:
An ASCII text string is returned in the format of hh:mm:ss.
Example:
-> GOESRRRATE?5
GOES RR Rate = 00:00:30rs
Command:
GOESRRRATE=hh:mm:ss
Description:
Set the transmission rate for the random report mode of the GOES radio.
Parameters:
The new rate is to be entered in the format of HH:MM:SS, where H is hours, M is
minutes, and S is seconds.
Response:
None.
Example:
-> GOESRRRATE=00:01:005
rs
Command:
GOESRRTRIGGERMODE?
Description:
Read the current mode of random report operation of the GOES radio. This
value, along with trigger source, determines what conditions are checked when
evaluating whether or not to generate a GOES random report.
Parameters:
None.
Response:
An ASCII text string is returned. The response will be “Always ”, “> Set Pt”, “<
Set Pt”, or “Delta “. (See GOES section for details)
Example:
-> GOESRRTRIGGERMODE?5
GOES RR Trigger Mode = Always
C-62 Remote Operation (Command Mode)
Command sent to the XL™.
Response sent to the host system.
Command sent to the XL™.
Response sent to the host system.
Command sent to the XL™.
Response sent to the host system.
rs
Command sent to XL™.
Response from XL™.
XL™ SERIES